- Sarma Inox conform EN 10270-3 / DIN 17224/82
Sarma trefilata la rece din otel inox
| Clasificare AISI | W. nr. | Denumire | Dimensiuni | Ambalaj |
|---|---|---|---|---|
| AISI 302 | W 1.4310 | X10CrNi18-8 | 0.10-12.00 mm | colac sau bobina |
| AISI 304 | W 1.4301 | X5CrNi18-10 | 0.10-10.00 mm | colac, bobina, bara |
| AISI 316 | W 1.4401 | X5CrNiMo17-12-2 | 0.30-10.00 mm | colac, bobina, bara |
| AISI 631 | W 1.4568 | X7CrNiAl 17-7 | 0.30-10.00 mm | colac sau bobina |
Vizualizare stoc Sarma otel arc
| Diametru sarma – mm – | Rezistenta la tractiune – N/mm2 – | ||
|---|---|---|---|
| AISI 302 / 304 | AISI 316 | AISI 631 | |
| 0.08-0.20 | 2150-2400 | 1650-1900 | 1950-2000 |
| 0.23-0.40 | 2050-2300 | 1600-1850 | 1930-2180 |
| 0.45-0.60 | 1950-2200 | 1600-1850 | 1850-2100 |
| 0.65-1.00 | 1850-2100 | 1530-1780 | 1800-2050 |
| 1.20-1.40 | 1750-2000 | 1450-1700 | 1700-1950 |
| 1.60-2.00 | 1650-1900 | 1400-1650 | 1600-1850 |
| 2.30-2.60 | 1550-1800 | 1320-1570 | 1500-1750 |
| 2.90-4.00 | 1450-1700 | 1230-1480 | 1400-1650 |
| 4.50-6.00 | 1350-1600 | 1100-1350 | 1300-1550 |
| 7.00-8.50 | 1300-1500 | 1080-1240 | 1200-1380 |
| 9.00-12.00 | 1250-1440 | 1050-1210 | – |
| Clasificare AISI | Compozitie chimica | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Si max | Mn max | P max | S max | Cr | Mo | Ni | Alte elemente | |
| AISI 302 | 0.05 0.15 | 2.00 | 2.00 | 0.045 | 0.015 | 16.0 19.0 | ≤0.80 | 6.0 9.5 | N≤0.11 |
| AISI 304 | ≤0.07 | 1.00 | 2.00 | 0.045 | 0.015 | 17.5 19.5 | – | 8.0 10.5 | N≤0.11 |
| AISI 316 | ≤0.07 | 1.00 | 2.00 | 0.045 | 0.015 | 16.5 18.5 | 2.00 2.50 | 10.0 13.0 | N≤0.11 |
| AISI 631 | ≤0.09 | 0.70 | 1.00 | 0.04 | 0.015 | 16.0 18.0 | – | 6.5 7.8 | Al: 0.70 1.50 |
- Sarma otel carbon pentru arcuri conform EN 10270-1 / DIN 17223 / STAS 893-89
- Sarma otel arc calita in ulei conform EN 10270-2
Pentru informatii suplimentare, va rugam se ne contactati.